GATE Cutoff 2018

Sept. 13, 2017 Gitumoni

GATE Cutoff 2018GATE Cutoff 2018: The cutoff of GATE 2018 is the minimum qualifying marks that candidates must secure for qualifying GATE cutoff for admission to M.Tech programmes. GATE cut off 2018 will be released by IIT Guwahati. The qualifying GATE 2018 cutoff score will be released along with the result on March 17, 2018. GATE cut off are of three types - minimum qualifying marks for each discipline, institute wise cutoff score for admission, and cutoff for PSUs. The GATE cut off score varies each year as it depends on factors like the number of candidates appeared in the exam, availability of seats and difficulty level of the entrance examination. Previous year, for the ME paper, GATE Cut off for General category candidates was 32 while the cutoff score for OBC category was 29. Based on the GATE cutoff 2018 candidates will be offered admission in IITs, NITs and also PSU recruitments. GATE cutoff score will be calculated based on the normalization score for disciplines of multiple sessions. Since no common counselling is offered, each institute will be determining their GATE cut off 2018 to offer admissions to the postgraduate courses. Meanwhile, candidates can refer to the last year GATE cutoff trends to get an idea about how much to score in GATE 2018. To get more information about GATE Cutoff 2018 for 23 disciplines, previous year opening and closing ranks for IITs, NITs and PSUs cutoff for recruitment through the article below on this page.


GATE Cutoff 2018 - Dates

The GATE cut off will be released on March 17, 2018 along with the declaration of result. The dates related to the availability of GATE cut off score is mentioned below.

GATE cutoff 2018 dates

S.No. Events Dates
1 GATE Result March 17, 2018
2 GATE Cut off 2018 will be released on March 17, 2018
3 GATE 2018 scorecard March 20 to May 31, 2018


What is GATE Cutoff 2018?

The GATE Cutoff is the minimum marks which candidates have to score in the examination for admission into M.Tech/ME courses. Candidates will be selected based on the prepared GATE cutoff 2018. A variety of factors will be taken into consideration by the concerned authorities during the preparation of GATE 2018 cut off.

GATE Cutoff score: Factors

The minimum qualifying marks and institute wise GATE cutoff 2018 will depend on several factors. Some of the factors determined by the authority and institutes to prepare GATE cutoff are given below:

  • Exam’s difficulty level
  • Number of candidates appeared
  • Total number of seats

GATE cutoff score to be used for

1. GATE cut off score for IITs admissions
2. GATE cut off score for NITs admissions
3. GATE cut off score for PSUs recruitment
4. GATE scores for CSIR Fellowship

GATE Cutoff 2018 qualifying score: All candidates have to score minimum qualifying marks that shall be declared with the result. Candidates must score the minimum qualifying marks for appearing in the admission processes.

As per last year GATE cutoff, top disciplines such as ME, EC, EE, CE programmes had the highest qualifying marks:

GATE cut off score for General candidates:

S.No Branch 2017 2016
1 Electronics and Communication (EC) 25 25
2 Civil Engineering (CE) 28.7 25
3 Electrical Engineering (EE) 25.2 25.1
4 Mechanical Engineering (ME) 32.87 29.6
5 Computer Science & Information Technology (CS) 25 25
6 Instrumentation Engineering (IN) 34.6 31.6
7 Chemical Engineering (CH) 44.3 39.80

GATE cutoff score for OBC candidates:

S.No Branch 2017 2016
1 Electronics and Communication (EC) 22.5 22.5
2 Civil Engineering (CE) 25.8 22.5
3 Electrical Engineering (EE) 25.2 22.5
4 Mechanical Engineering (ME) 29 26.6
5 Computer Science & Information Technology (CS) 22.5 22.5
6 Instrumentation Engineering (IN) 31.1 28.4
7 Chemical Engineering (CH) 39.8 33.1

GATE cut off score for SC/ST/PH candidates:

S.No Branch 2017 2016
1 Electronics and Communication (EC) 16.6 16.6
2 Civil Engineering (CE) 19.1 16.6
3 Electrical Engineering (EE) 16.7 16.7
4 Mechanical Engineering (ME) 21 19.7
5 Computer Science & Information Technology (CS) 16.6 16.6
6 Instrumentation Engineering (IN) 23 21
7 Chemical Engineering (CH) 29.5 22

GATE cutoff score for PSUs recruitment: The PSUs will also determine its individual GATE cutoff. The PSUs will recruit candidates for various positions in IOCL, BHEL, GAIL, HPCL, ONGC, DRDO, DMRC etc. However, candidates should note that some PSU will consider the GATE score of candidates, whereas, some will determine the GATE Cutoff 2018 as per the normalised score.

As per the last year information, top recruiters such as BHEL and IOCL had released the cutoff through GATE. The vacancies for BHEL recruitment were 50. Selection was on the basis of the GATE 2017 scores

GATE Cutoff for BHEL Recruitment:

Discipline Mechanical Electrical Electronics Metallurgy
UR 79.31 69.98 68.68 65
OBC 75.18 66.04 65.32 57.67
SC 61.33 53.99 56.46 56.67
ST 53.84 50.59 49.13 48.67

GATE Cutoff for NTPC Recruitment:

Discipline General OBC SC ST
Mechanical 76.31 68.69 55.83 49.72
Electrical 66.69 61.11 50.93 49.28
IT 65.93 55.76 50.71 37.71
Instrumentation 63.33 55 43 46.67
Electronics 63.74 55.85 47.47 47.1
Civil 73.12 70.34 64.84 57.56

GATE cut off score for IITs admissions:

Qualifying GATE 2018 will not ensure admission to Indian Institute of Technologies (IITs). Each institute will determine its own GATE 2018 cutoff for admission. The admission in IITs will be done on the basis of cutoff determined by the individual institute. Candidates who have the required cutoff will get admission in the IITs as per the availability of seats in the particular course and institute.

As per the last year GATE cutoff, top IITs such as IIT Bombay and IIT Kanpur had released the highest opening and closing rank for various courses. Check the table below.

IIT Bombay GATE Cutoff for Mechanical Engineering (ME) and Electronics and Communication (EC)

General 75
OBC 675
SC 500
ST 500

GATE Cutoff 2017 for IIT Kanpur - Electrical Engineering

GATE Papers Micro
electronics & VLSI
Signal Processing, Communication & Networks RF & Microwaves Power Engineering Control & Automation Photonics
General 805 720 700 770 780 690
OBC 684 612 595 654 663 585
SC 531 475 462 508 514 455
ST/ PwD 531 475 462 508 514 455

GATE cut off score for NITs admissions

NITs and CFTIs will grant admission through Centralized Counselling for M.Tech/M.Arch/M.Plan (CCMT). The cutoff for each institute as per the previous year has been provided on this page. The GATE Cutoff for NITs lists out the minimum GATE score required for the admissions to the M.Tech programmes. The GATE score is listed for each NIT discipline wise and category wise.

GATE scores for CSIR Fellowship

GATE qualified candidates with BE/ will be qualified are eligible for Junior Research Fellowship (JRF) in Council of Scientific and Industrial Research (CSIR) Laboratories and CSIR sponsored projects. After joining as JRF-GATE, candidate may pursue M.Tech as a part of PhD programme, where their thesis semester (last semester) should be spent at the CSIR laboratory relating to lab specialization in order to keep the continuity for the Ph.D. programme.

GATE cut off score for popular branches - CSE, ME, CE, ECE, EE

GATE Cutoff for top disciplines- CSE, ME, CE, ECE, EE has been provided here. The candidates can refer to the previous cutoff trends to know the probable cutoff scores for the present session. The data of each subject for last three years for IITs. The cutoff of the previous year GATE examinations are listed below.

GATE cut off score for CSE: Computer science engineering (CSE) is one of the popular courses among engineering aspirants which focuses on the basic elements of computer programming and networking. CSE course deals primarily with the theory of computation and design of computational systems.

GATE Cut off – qualifying marks for CSE

Year 2017 2016 2015
General 25 25 25
OBC 22.5 22.5 22.5
SC/ ST/ PH 16.6 16.6 16.67

GATE cut off score for ME: Mechanical engineering is a programme which helps students in the technical areas like distribution of electricity through generators, transformers, transmission lines, lighting and wiring in buildings. A course in mechanical engineering makes a student gain knowledge and experience in the designing of electric motors, automobiles, aircrafts and other heavy vehicles.

GATE Cutoff – qualifying marks for ME

Category 2017 2016 2015
General 32.87 29.6 32.73
OBC 29 26.6 29.46
SC/ST/PH 21 19.7 21.82

GATE cutoff score for ECE: Electronics and Communication Engineering (ECE) compiles Communication Engineering and core Electronics Engineering. The course concept is to focus mainly on the communication part with the knowledge of the electronics field. ECE is one of the fastest growing fields that impart information for transmission across the channel.

GATE Cutoff – qualifying marks for ECE

Year 2017 2016 2015
General 25 25 25
OBC-NCL 22.5 22.5 22.5
SC/ST/PH 16.6 16.6 16.67

GATE cut off score for EE: Electrical engineering is a field of engineering that generally deals with the study and application of electricity, electronics, and electromagnetism. They mainly focus on circuit theory to the management skills required of a project manager.

GATE Cutoff – qualifying marks for EE

Year 2017 2016 2015
General 25.2 25.1 25
OBC-NCL 25.2 22.5 22.5
SC/ST/PH 16.7 16.7 16.67

GATE cut off score for CE: Civil engineering is a professional engineering discipline that deals with the design, construction, and maintenance of the physical and naturally built environment, including works like roads, bridges, canals, dams, and buildings. Civil engineering course deals with planning, designing, constructing, maintaining, and operating infrastructures while protecting the public and environmental health as well as improving existing infrastructure.

GATE Cutoff – qualifying marks for CE

Year 2017 2016 2015
General 28.70 25.8 19.10
OBC-NCL 25 22.5 16.6
SC/ST/PH 25 22.5 16.67


Related Articles